CS6 Walk In Chemstor Storage Cabinet Holds 108 Containers

CS6 large walk in lockable chemical storage cabinet / unit with shelves.

This model can hold up to 108 x 25ltr cans on the shelving provided (including the floor under the shelving, plus the free space in the rest of the unit.

Backed by a 20 year structural guarantee.

A pressed steel welded body construction provides the structural strength for this unit, while the roof which is fitted with lifting eyes is manufactured from mild steel. The hinged personnel door is constructed from mild steel and is fitted with cam-lock gear system like those found on shipping containers, which when fitted with the appropriate padlock (not supplied) provides excellent security. As standard the unit is also fitted with high and low level louvre vents complete with flame arrestor mesh.

Constructed from mild steel, the sump is fully seam welded and fitted with profiled rib strengtheners and covered with galvanised steel grid mesh panels. The capacity of the sump fully complies with all current UK regulations relating to sump capacities and the underside of the unit is fitted with plinths to eliminate contact with ground and reduce the risk of corrosion. Prior to painting the unit is fully shot blasted to provide a clean and keyed surface.

The unit is fitted with 3 sets of racking; one on the end wall to the right as you enter the unit, one on the front and one on the back wall opposite each other and each set of racking is fitted with 2 sets of height adjustable grid mesh shelves. 

*Please note this is a made to order product, typically 6 to 8 weeks. 

SPECIFICATION

DELIVERY

Free UK mainland delivery
Made to order, 6 to 8 weeks
You will require an appropriate size / capacity forklift truck to offload from delivery vehicle
Standard delivery does not include offloading
HGV access required, possibly articulated

A chargeable HIAB service is available, which means the unit can be offloaded in any location that the HIAB vehicle can stand adjacent to. The use of this service doesn't include the levelling of the unit or any responsibility for where you ask for it to be placed on the ground. Any subsequent issues with subsidence or the unit becoming un-level remain your (the customers) responsibility.

INSTALLATION

The unit must be positioned on a solid level surface, ideally concrete of circa 150mm in depth and 100mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded. Roadware will not accept responsibility for the correction of units which have been settled on uneven or subsiding ground.